DINGNOTS

  This is our own custom-design body protection from parking lot dings. It's made of padded vinyl with imbedded hardboard for rigidity and magnets on the inside to hold it in place. Nothing but the soft vinyl touches your paint! It also folds up neatly for storage under the seat or in the trunk!

    Just pull it out and throw it on your car door or front fender when you have to leave your car in a parking lot and you have instant ding protection from those idiots that bash their doors into yours. Get a pair for your show car to use in hotel parking lots and get a pair for your everyday driver too!

A three-section dingnot (approximately 38" long) is shown above on the door of a 1970 Challenger and on the door of a Daytona. The three-section dingnot folds up as shown to approximately 12-1/2".

Dingnots are available in all of the fender cover colors shown below. Ordering information shown below.

Prices are as follows:

Pair of 2-section Dingnots (for front fenders and extremely small cars) $25 plus $8.50 shipping in the USA.

Pair of 3-section Dingnots (for doors on regular sized cars) $40 plus $8.50 shipping in the USA.

_____________________________________________________________________________________________

DAYTONA AND SUPERBIRD FENDER COVERS

    Protect your fender completely while you are working on your car with our custom-made winged car fender covers. No more generic fender covers that never stay put because of that fender scoop. Our custom-made covers have a sewn-in pouch that fits over the fender scoop, plus magnets sewn into the material at strategic points to hold it in place.

    Because of the design, one cover will fit both sides of the car. Just pull the velcroed seam apart to fit around the hood hinge!

    These fender covers are made from premium quality vinyl with a soft backing. They wipe clean and are available in most high-impact colors to match your winged car, plus black, charcoal and white.

Fender covers are available in all of the colors as shown: Petty Blue, Red, White, Yellow, Dark Blue, Purple, Charcoal, Black, Orange

Daytona and Superbird fender cover prices are as follows: $72 each plus $12 shipping in the USA.

________________________________________________________________________________________________

   LATCH TRAY COVERS

    Where do all of the tools end up while you're working on your Daytona or Superbird? On the latch tray, of course! Have you ever had to fish sockets or bolts out of a Daytona nosecone after it falls down that square hole in the latch tray...not a good experience!

Protect that latch tray's finish and avoid the tools falling into the nose with our custom-made latch tray covers. They're made of premium vinyl with stitched edges. The Daytona latch tray cover is shown at left above. The Superbird latch tray cover is shown at right above and has a template marked on the back side for you to cut out an "X" for the hood spring to come through.

Latch tray covers are available in all of the colors shown above and are priced as follows:

Daytona or Superbird latch tray cover $24 each plus $8.50 shipping in the USA.

--OR--order a fender cover and a latch tray cover for the special price of $90 plus $12 shipping in the USA.

TO ORDER ANY OF THE ABOVE ITEMS: STATE WHAT ITEM(S) YOU WANT AND WHETHER IT'S FOR A DAYTONA OR A SUPERBIRD, QUANTITY, COLOR(S) AND INCLUDE A MONEY ORDER IN THE PROPER AMOUNT--DON'T FORGET THE SHIPPING CHARGES! INCLUDE YOUR RETURN ADDRESS AND PHONE NUMBER IN CASE WE HAVE A QUESTION ABOUT YOUR ORDER. FOREIGNERS INQUIRE ABOUT SHIPPING COSTS.

SEND TO: SUE GEORGE, 216-12th STREET, BOONE,  IA  50036-2019

IF YOU HAVE QUESTIONS, SEND ME AN E-MAIL AT: hemixx29@msn.com